Choose the Solus Multi-Purpose Disinfectant format that fits your workflow: 946 mL, 3.78 L or 18.9 L online, with 205 L and 1000 L formats available through Solus. Every size contains the same made-in-Canada HOCl formulation for label-authorized hard, non-porous surface uses.
What is the Multi-Purpose Disinfectant?
The product is a hypochlorous acid (HOCl) disinfectant supplied at a current label concentration of 367 ppm free available chlorine. The same formulation is used across every format, so the choice between sizes is about volume and storage, not a change in the product. Its near-neutral formula is low residue; follow the current label, including applicable rinse directions.
What is it authorized for?
Health Canada biocide market authorization no. 02557371 covers four use areas: Food Premises, Hospital / Health Care Facilities, Domestic, and Institutional / Industrial. The current label defines each authorized surface, method, contact time, precaution and rinse requirement. Always confirm the intended surface against the current label before use — a use area authorizes disinfection of eligible hard surfaces, not direct application to food.
How to use it
Remove visible soil first, then apply the product to the hard, non-porous surface and keep it wet for the full contact time stated on the current label. Rinse with potable water after application on surfaces or objects that may come into direct contact with infants or toddlers, animals, food, feed, or drinking water. Do not treat the product as universally “no-rinse”; follow the label and SDS for directions, contact time, and precautions.
Choosing your format
The 946 mL, 3.78 L and 18.9 L formats all contain the same Multi-Purpose Disinfectant — select by expected usage frequency, storage space and workflow. For high-volume or facility-scale supply, the 205 L and 1000 L industrial formats are available by contacting Solus.
Independently tested efficacy
Independently GLP-tested by Analytical Lab Group: S. aureus (ATCC 6538), Salmonella enterica (ATCC 10708), and P. aeruginosa (ATCC 15442) by AOAC Use Dilution Method, 10-minute contact time (report A30442); Human Coronavirus 229E (ATCC VR-740) and Influenza A H1N1 (ATCC VR-1469) by the virucidal surface protocol, 1-minute contact time (reports A30618 and A31073). See the lab reports on the Documents page. This is a documentation reference, not a blanket promise for every organism, surface or method.
Documents & compliance
Review the current authorization, label, SDS and laboratory reports on the Solus documents page before relying on the product in a written procedure or audit file.
Frequently asked questions
What is the Multi-Purpose Disinfectant authorized for?
It holds Health Canada biocide market authorization no. 02557371 for Food Premises, Hospital / Health Care Facilities, Domestic, and Institutional / Industrial use areas. Each authorized surface, contact time and rinse requirement is defined on the current label.
What concentration is the product?
The current label concentration is 367 ppm free available chlorine. Use the current label and SDS when documenting concentration.
Do I need to rinse after use?
Rinse with potable water after application on surfaces or objects that may directly contact infants or toddlers, animals, food, feed, or drinking water, as stated on the current label. It is not a universal “no-rinse” product.
Which format should I choose?
Choose 946 mL, 3.78 L or 18.9 L online based on usage and storage. For 205 L or 1000 L industrial supply, contact Solus.
Is the product non-toxic?
Solus describes it as a reduced-toxicity option when used as directed, not as absolutely non-toxic. Follow the current label and SDS, including eye protection where splashing is possible and gloves for prolonged or repeated contact.
Reviews
There are no reviews yet.